first commit
This commit is contained in:
commit
3e04ff2aac
174
README.md
Normal file
174
README.md
Normal file
@ -0,0 +1,174 @@
|
|||||||
|
# MiniPill LoRa Board
|
||||||
|
Here is general information on the (PlatformIO) settings for the MiniPill
|
||||||
|
LoRa boards. The files on this repository are placed in ~/.platformio.
|
||||||
|
Where ~/ is your home directory.
|
||||||
|
|
||||||
|
These settings are used on macOS platforms with user leo.
|
||||||
|
Please changes the files for your OS/user.
|
||||||
|
|
||||||
|
## version 2022-12-24
|
||||||
|
Created develop branch where other boards with other microcontrollers are
|
||||||
|
available and tested. Removed them from main branch. Only the
|
||||||
|
STM32L051C8T6 and STM32L151C8T6 version is present at the main branch.
|
||||||
|
|
||||||
|
## versions 2022-10-23
|
||||||
|
- ```PlatformIO Core, version 6.1.4```
|
||||||
|
- Initial setup of this repository
|
||||||
|
- Removed board information from MiniPill LoRa LMIC project and moved to
|
||||||
|
this repository
|
||||||
|
|
||||||
|
## Board versions
|
||||||
|
There are different version available 1.x, 2.x, 3.x. All versions use the
|
||||||
|
same electronic schematic. Only the PCB layout and/or antenna connector is
|
||||||
|
different.
|
||||||
|
|
||||||
|
## Two types of processors supported
|
||||||
|
In the boards directory are a two major types and some test boards, please
|
||||||
|
ignore them.
|
||||||
|
|
||||||
|
The Orginal MiniPill LoRa with STM32L051C8T6
|
||||||
|
|
||||||
|
```minipill_l051c8_lora.json``` variant dir: ```MINIPILL_L051XX_LORA```
|
||||||
|
|
||||||
|
For testing with STM32L151C8T6
|
||||||
|
|
||||||
|
```minipill_l151c8_lora.json``` variant dir: ```MINIPILL_L151XX_LORA```
|
||||||
|
|
||||||
|
|
||||||
|
## Adding a custom board in PlatformIO
|
||||||
|
To work with the MiniPill LoRa in more than one project you should add
|
||||||
|
this custom board to you PlatformIO toolset.
|
||||||
|
On MacOS under the user's homedirectory a .platformio directory is
|
||||||
|
available for the toolsets. This is the platformio homedirectory. Please
|
||||||
|
check for your OS where this directory is located.
|
||||||
|
|
||||||
|
- copy the *boards* and *variants* directory from customboard directory to
|
||||||
|
the ```.platformio``` directory
|
||||||
|
- change the absolute path in the boards/minipill_l051c8_lora.json file
|
||||||
|
for the variants path
|
||||||
|
- restart platformio/IDE
|
||||||
|
|
||||||
|
Now you should be able to use the MiniPill LoRa board in a new project.
|
||||||
|
Not all functions are tested with this custom board configurations.
|
||||||
|
|
||||||
|
## debugging
|
||||||
|
I use the hardwareSerial for debugging and connected a serial TTL-USB
|
||||||
|
converter. This will take some power in Low Power mode.
|
||||||
|
|
||||||
|
## Clock Settings
|
||||||
|
The clock settings for this custom board are set in the
|
||||||
|
`.platformio/variants/MINIPILL_L051XX_LORA/variant.cpp` file. In the `WEAK
|
||||||
|
void SystemClock_Config(void)` function the HAL functions are called to
|
||||||
|
select the clocks.
|
||||||
|
For use of I2C and 100kHz clock signal you have to change these settings
|
||||||
|
in:
|
||||||
|
|
||||||
|
```
|
||||||
|
WEAK void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
|
||||||
|
|
||||||
|
/* Configure the main internal regulator output voltage */
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
|
||||||
|
/* Initializes the CPU, AHB and APB busses clocks */
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
|
||||||
|
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
|
||||||
|
RCC_OscInitStruct.MSICalibrationValue = 0;
|
||||||
|
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_5;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Initializes the CPU, AHB and APB busses clocks */
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK |
|
||||||
|
RCC_CLOCKTYPE_SYSCLK
|
||||||
|
| RCC_CLOCKTYPE_PCLK1 |
|
||||||
|
RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) !=
|
||||||
|
HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1 |
|
||||||
|
RCC_PERIPHCLK_USART2
|
||||||
|
| RCC_PERIPHCLK_I2C1;
|
||||||
|
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
|
||||||
|
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
|
||||||
|
PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_PCLK1;
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
```
|
||||||
|
|
||||||
|
You can also **add this function to you main code** and call it in the
|
||||||
|
first line of the setup function of your Arduino main program. Do not use
|
||||||
|
the WEAK compiler direction.
|
||||||
|
|
||||||
|
When you must use a higher clock rate you should use the HSI clock. In my
|
||||||
|
experience this is necessary when using OLED displays with I2C
|
||||||
|
communication.
|
||||||
|
|
||||||
|
The function for 400kHz clock rate is:
|
||||||
|
|
||||||
|
```
|
||||||
|
void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||||
|
|
||||||
|
/** Configure the main internal regulator output voltage
|
||||||
|
*/
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
/** Initializes the RCC Oscillators according to the specified
|
||||||
|
parameters
|
||||||
|
* in the RCC_OscInitTypeDef structure.
|
||||||
|
*/
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||||
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||||
|
RCC_OscInitStruct.HSICalibrationValue =
|
||||||
|
RCC_HSICALIBRATION_DEFAULT;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Initializes the CPU, AHB and APB buses clocks
|
||||||
|
*/
|
||||||
|
RCC_ClkInitStruct.ClockType =
|
||||||
|
RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||||
|
|
||||||
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV8;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) !=
|
||||||
|
HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C1;
|
||||||
|
PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_HSI;
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
```
|
||||||
|
|
||||||
|
Remember that the change in clock settings will affect power consumption!
|
||||||
|
You can generate you own clock settings by using STM32CubeMX or
|
||||||
|
STM32CubeMXIDE configurator. Copy the `SystemClock_Config(void)` function
|
||||||
|
generated by the configurator.
|
||||||
|
|
45
boards/minipill_l051c8_lora.json
Normal file
45
boards/minipill_l051c8_lora.json
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
{
|
||||||
|
"build": {
|
||||||
|
"core": "stm32",
|
||||||
|
"cpu": "cortex-m0plus",
|
||||||
|
"extra_flags": "-DSTM32L0xx -DSTM32L051xx",
|
||||||
|
"f_cpu": "32000000L",
|
||||||
|
"framework_extra_flags": {
|
||||||
|
"arduino": "-D__CORTEX_SC=0"
|
||||||
|
},
|
||||||
|
"mcu": "stm32l051c8t6",
|
||||||
|
"variant": "/Users/leo/.platformio/variants/MINIPILL_L051XX_LORA"
|
||||||
|
},
|
||||||
|
"debug": {
|
||||||
|
"jlink_device": "STM32L051C8",
|
||||||
|
"openocd_target": "stm32l0",
|
||||||
|
"svd_path": "STM32L051x.svd"
|
||||||
|
},
|
||||||
|
"frameworks": [
|
||||||
|
"arduino",
|
||||||
|
"cmsis",
|
||||||
|
"stm32cube"
|
||||||
|
],
|
||||||
|
"platforms": [
|
||||||
|
"ststm32"
|
||||||
|
],
|
||||||
|
"name": "MiniPill L051C8 LORA",
|
||||||
|
"upload": {
|
||||||
|
"disable_flushing": false,
|
||||||
|
"maximum_ram_size": 8192,
|
||||||
|
"maximum_size": 65536,
|
||||||
|
"protocol": "stlink",
|
||||||
|
"protocols": [
|
||||||
|
"jlink",
|
||||||
|
"stlink",
|
||||||
|
"blackmagic",
|
||||||
|
"dfu",
|
||||||
|
"serial"
|
||||||
|
],
|
||||||
|
"require_upload_port": true,
|
||||||
|
"use_1200bps_touch": false,
|
||||||
|
"wait_for_upload_port": false
|
||||||
|
},
|
||||||
|
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32l051c8.html",
|
||||||
|
"vendor": "IoT-lab.org"
|
||||||
|
}
|
45
boards/minipill_l051c8_lora_custom.json
Normal file
45
boards/minipill_l051c8_lora_custom.json
Normal file
@ -0,0 +1,45 @@
|
|||||||
|
{
|
||||||
|
"build": {
|
||||||
|
"core": "stm32",
|
||||||
|
"cpu": "cortex-m0plus",
|
||||||
|
"extra_flags": "-DSTM32L0xx -DSTM32L051xx",
|
||||||
|
"f_cpu": "32000000L",
|
||||||
|
"framework_extra_flags": {
|
||||||
|
"arduino": "-D__CORTEX_SC=0"
|
||||||
|
},
|
||||||
|
"mcu": "stm32l051c8t6",
|
||||||
|
"variant": "/Users/d.kuhn/.platformio/variants/MINIPILL_L051XX_LORA_CUSTOM"
|
||||||
|
},
|
||||||
|
"debug": {
|
||||||
|
"jlink_device": "STM32L051C8",
|
||||||
|
"openocd_target": "stm32l0",
|
||||||
|
"svd_path": "STM32L051x.svd"
|
||||||
|
},
|
||||||
|
"frameworks": [
|
||||||
|
"arduino",
|
||||||
|
"cmsis",
|
||||||
|
"stm32cube"
|
||||||
|
],
|
||||||
|
"platforms": [
|
||||||
|
"ststm32"
|
||||||
|
],
|
||||||
|
"name": "MiniPill L051C8 LORA CUSTOM",
|
||||||
|
"upload": {
|
||||||
|
"disable_flushing": false,
|
||||||
|
"maximum_ram_size": 8192,
|
||||||
|
"maximum_size": 65536,
|
||||||
|
"protocol": "stlink",
|
||||||
|
"protocols": [
|
||||||
|
"jlink",
|
||||||
|
"stlink",
|
||||||
|
"blackmagic",
|
||||||
|
"dfu",
|
||||||
|
"serial"
|
||||||
|
],
|
||||||
|
"require_upload_port": true,
|
||||||
|
"use_1200bps_touch": false,
|
||||||
|
"wait_for_upload_port": false
|
||||||
|
},
|
||||||
|
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32l051c8.html",
|
||||||
|
"vendor": "IoT-lab.org"
|
||||||
|
}
|
39
boards/minipill_l151c8_lora.json
Normal file
39
boards/minipill_l151c8_lora.json
Normal file
@ -0,0 +1,39 @@
|
|||||||
|
{
|
||||||
|
"build": {
|
||||||
|
"cpu": "cortex-m3",
|
||||||
|
"extra_flags": "-DSTM32L1 -DSTM32L151xB",
|
||||||
|
"f_cpu": "32000000L",
|
||||||
|
"mcu": "stm32l151c8xx",
|
||||||
|
"product_line": "STM32L151x8",
|
||||||
|
"variant": "/Users/leo/.platformio/variants/MINIPILL_L151XX_LORA"
|
||||||
|
},
|
||||||
|
"debug": {
|
||||||
|
"jlink_device": "STM32L151C8",
|
||||||
|
"openocd_target": "stm32l1",
|
||||||
|
"svd_path": "STM32L15x8.svd"
|
||||||
|
},
|
||||||
|
"frameworks": [
|
||||||
|
"arduino",
|
||||||
|
"cmsis",
|
||||||
|
"stm32cube",
|
||||||
|
"libopencm3"
|
||||||
|
],
|
||||||
|
"platforms": [
|
||||||
|
"ststm32"
|
||||||
|
],
|
||||||
|
"name": "MiniPill L151C8 LORA",
|
||||||
|
"upload": {
|
||||||
|
"maximum_ram_size": 10240,
|
||||||
|
"maximum_size": 65536,
|
||||||
|
"protocol": "stlink",
|
||||||
|
"protocols": [
|
||||||
|
"jlink",
|
||||||
|
"stlink",
|
||||||
|
"blackmagic",
|
||||||
|
"dfu",
|
||||||
|
"serial"
|
||||||
|
]
|
||||||
|
},
|
||||||
|
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32l151c8.html",
|
||||||
|
"vendor": "IoT-lab.org"
|
||||||
|
}
|
189
variants/MINIPILL_L051XX_LORA/PeripheralPins.c
Normal file
189
variants/MINIPILL_L051XX_LORA/PeripheralPins.c
Normal file
@ -0,0 +1,189 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2019, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
*******************************************************************************
|
||||||
|
* Initially Automatically generated from STM32L051C(6-8)Tx.xml
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For MiniPill LoRa configuration
|
||||||
|
* 2020-12-27 Changed for I2C SDA to PB_7 and SCL to PB_6
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "Arduino.h"
|
||||||
|
#include "PeripheralPins.h"
|
||||||
|
|
||||||
|
/* =====
|
||||||
|
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||||
|
* If you change them, you will have to know what you do
|
||||||
|
* =====
|
||||||
|
*/
|
||||||
|
|
||||||
|
//*** ADC ***
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_ADC[] = {
|
||||||
|
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
|
||||||
|
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
|
||||||
|
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
|
||||||
|
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
|
||||||
|
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
|
||||||
|
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
|
||||||
|
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
|
||||||
|
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
|
||||||
|
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
|
||||||
|
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No DAC ***
|
||||||
|
|
||||||
|
//*** I2C ***
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||||
|
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
|
||||||
|
//{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
//{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||||
|
//{PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||||
|
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
|
||||||
|
//{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
//{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||||
|
//{PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** PWM ***
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_PWM[] = {
|
||||||
|
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
|
||||||
|
//{PA_2, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1
|
||||||
|
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
|
||||||
|
//{PA_3, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // TIM21_CH2
|
||||||
|
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PA_6, TIM22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // TIM22_CH1
|
||||||
|
{PA_7, TIM22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // TIM22_CH2
|
||||||
|
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PB_4, TIM22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 1, 0)}, // TIM22_CH1
|
||||||
|
{PB_5, TIM22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 2, 0)}, // TIM22_CH2
|
||||||
|
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
|
||||||
|
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
|
||||||
|
{PB_13, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 1, 0)}, // TIM21_CH1
|
||||||
|
{PB_14, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 2, 0)}, // TIM21_CH2
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SERIAL ***
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_TX[] = {
|
||||||
|
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||||
|
//{PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
|
||||||
|
{PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_RX[] = {
|
||||||
|
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||||
|
//{PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
|
||||||
|
{PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||||
|
//{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
//{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||||
|
//{PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
//{PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPUART1)},
|
||||||
|
//{PB_14, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||||
|
//{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
//{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
//{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||||
|
//{PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SPI ***
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||||
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||||
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||||
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
//{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||||
|
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
//{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No CAN ***
|
||||||
|
|
||||||
|
//*** No ETHERNET ***
|
||||||
|
|
||||||
|
//*** No QUADSPI ***
|
||||||
|
|
||||||
|
//*** No USB ***
|
25
variants/MINIPILL_L051XX_LORA/PinNamesVar.h
Normal file
25
variants/MINIPILL_L051XX_LORA/PinNamesVar.h
Normal file
@ -0,0 +1,25 @@
|
|||||||
|
/* SYS_WKUP */
|
||||||
|
#ifdef PWR_WAKEUP_PIN1
|
||||||
|
SYS_WKUP1 = PA_0,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN2
|
||||||
|
SYS_WKUP2 = PC_13,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN3
|
||||||
|
SYS_WKUP3 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN4
|
||||||
|
SYS_WKUP4 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN5
|
||||||
|
SYS_WKUP5 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN6
|
||||||
|
SYS_WKUP6 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN7
|
||||||
|
SYS_WKUP7 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN8
|
||||||
|
SYS_WKUP8 = NC,
|
||||||
|
#endif
|
189
variants/MINIPILL_L051XX_LORA/ldscript.ld
Normal file
189
variants/MINIPILL_L051XX_LORA/ldscript.ld
Normal file
@ -0,0 +1,189 @@
|
|||||||
|
/*
|
||||||
|
******************************************************************************
|
||||||
|
**
|
||||||
|
|
||||||
|
** File : LinkerScript.ld
|
||||||
|
**
|
||||||
|
** Author : Auto-generated by Ac6 System Workbench
|
||||||
|
**
|
||||||
|
** Abstract : Linker script for STM32L051C8Tx series
|
||||||
|
** 64Kbytes FLASH and 8Kbytes RAM
|
||||||
|
**
|
||||||
|
** Set heap size, stack size and stack location according
|
||||||
|
** to application requirements.
|
||||||
|
**
|
||||||
|
** Set memory bank area and size if external memory is used.
|
||||||
|
**
|
||||||
|
** Target : STMicroelectronics STM32
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed “as is,” without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
** @attention
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20002000; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
|
||||||
|
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM AT> FLASH
|
||||||
|
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(8);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
}
|
||||||
|
|
||||||
|
|
116
variants/MINIPILL_L051XX_LORA/variant.cpp_HSI_I2C
Normal file
116
variants/MINIPILL_L051XX_LORA/variant.cpp_HSI_I2C
Normal file
@ -0,0 +1,116 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
// Board Layout
|
||||||
|
// Same as
|
||||||
|
const PinName digitalPin[] = {
|
||||||
|
PB_4, // D0
|
||||||
|
PB_5,
|
||||||
|
PB_6,
|
||||||
|
PB_7,
|
||||||
|
PB_8,
|
||||||
|
PB_9,
|
||||||
|
PB_10,
|
||||||
|
PB_11,
|
||||||
|
PA_0, // D8/A0
|
||||||
|
PA_1,
|
||||||
|
PA_2,
|
||||||
|
PA_3,
|
||||||
|
PA_4,
|
||||||
|
PA_5,
|
||||||
|
PA_6,
|
||||||
|
PA_7,
|
||||||
|
PA_9,
|
||||||
|
PA_10
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* The system Clock is configured as follow :
|
||||||
|
* System Clock source = MSI
|
||||||
|
* SYSCLK(Hz) = 2,079,000
|
||||||
|
* HCLK(Hz) = 2,079,000
|
||||||
|
* AHB Prescaler = 1
|
||||||
|
* APB1 Prescaler = 1
|
||||||
|
* APB2 Prescaler = 1
|
||||||
|
* PLL_Source = NA
|
||||||
|
* PLL_Mul = NA
|
||||||
|
* Flash Latency(WS) = 0
|
||||||
|
* ADC Prescaler = 1
|
||||||
|
* USB Prescaler = NA
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
WEAK void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||||
|
|
||||||
|
/** Configure the main internal regulator output voltage
|
||||||
|
*/
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
/** Initializes the RCC Oscillators according to the specified parameters
|
||||||
|
* in the RCC_OscInitTypeDef structure.
|
||||||
|
*/
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||||
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||||
|
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Initializes the CPU, AHB and APB buses clocks
|
||||||
|
*/
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||||
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV8;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C1;
|
||||||
|
PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_HSI;
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
130
variants/MINIPILL_L051XX_LORA/variant_MINIPILL_L051C8_LORA.cpp
Normal file
130
variants/MINIPILL_L051XX_LORA/variant_MINIPILL_L051C8_LORA.cpp
Normal file
@ -0,0 +1,130 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
// Board Layout
|
||||||
|
// Same as
|
||||||
|
const PinName digitalPin[] = {
|
||||||
|
PB_4, // D0
|
||||||
|
PB_5,
|
||||||
|
PB_6,
|
||||||
|
PB_7,
|
||||||
|
PB_8,
|
||||||
|
PB_9,
|
||||||
|
PB_10,
|
||||||
|
PB_11,
|
||||||
|
PA_0, // D8/A0
|
||||||
|
PA_1,
|
||||||
|
PA_2,
|
||||||
|
PA_3,
|
||||||
|
PA_4,
|
||||||
|
PA_5,
|
||||||
|
PA_6,
|
||||||
|
PA_7, // D15/A7
|
||||||
|
PA_9,
|
||||||
|
PA_10
|
||||||
|
};
|
||||||
|
|
||||||
|
// Analog (Ax) pin number array
|
||||||
|
const uint32_t analogInputPin[] = {
|
||||||
|
8, // A0, PA0
|
||||||
|
9, // A1, PA1
|
||||||
|
10, // A2, PA2
|
||||||
|
11, // A3, PA3
|
||||||
|
12, // A4, PA4
|
||||||
|
13, // A5, PA5
|
||||||
|
14, // A6, PA6
|
||||||
|
15 // A7, PA7
|
||||||
|
// 16, // A8, PB0
|
||||||
|
// 17 // A9, PB1
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* The system Clock is configured as follow :
|
||||||
|
* System Clock source = MSI
|
||||||
|
* SYSCLK(Hz) = 2,079,000
|
||||||
|
* HCLK(Hz) = 2,079,000
|
||||||
|
* AHB Prescaler = 1
|
||||||
|
* APB1 Prescaler = 1
|
||||||
|
* APB2 Prescaler = 1
|
||||||
|
* PLL_Source = NA
|
||||||
|
* PLL_Mul = NA
|
||||||
|
* Flash Latency(WS) = 0
|
||||||
|
* ADC Prescaler = 1
|
||||||
|
* USB Prescaler = NA
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
WEAK void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
|
||||||
|
|
||||||
|
/* Configure the main internal regulator output voltage */
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
|
||||||
|
/* Initializes the CPU, AHB and APB busses clocks */
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
|
||||||
|
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
|
||||||
|
RCC_OscInitStruct.MSICalibrationValue = 0;
|
||||||
|
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_5;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Initializes the CPU, AHB and APB busses clocks */
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||||
|
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2;
|
||||||
|
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
|
||||||
|
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
111
variants/MINIPILL_L051XX_LORA/variant_MINIPILL_L051C8_LORA.h
Normal file
111
variants/MINIPILL_L051XX_LORA/variant_MINIPILL_L051C8_LORA.h
Normal file
@ -0,0 +1,111 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For MiniPill LoRa:
|
||||||
|
* 2020-12-27 added I2C Definitions
|
||||||
|
* 2020-02-21 changed PIN_SPI_SS from PA2 to PA4
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
#ifndef _VARIANT_ARDUINO_STM32_
|
||||||
|
#define _VARIANT_ARDUINO_STM32_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif // __cplusplus
|
||||||
|
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Pins
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
// defined in order of D0-D10 A0-A3
|
||||||
|
|
||||||
|
#define PB4 0
|
||||||
|
#define PB5 1
|
||||||
|
#define PB6 2
|
||||||
|
#define PB7 3
|
||||||
|
#define PB8 4
|
||||||
|
#define PB9 5
|
||||||
|
#define PB10 6
|
||||||
|
#define PB11 7
|
||||||
|
#define PA0 PIN_A0
|
||||||
|
#define PA1 PIN_A1
|
||||||
|
#define PA2 PIN_A2
|
||||||
|
#define PA3 PIN_A3
|
||||||
|
#define PA4 PIN_A4
|
||||||
|
#define PA5 PIN_A5
|
||||||
|
#define PA6 PIN_A6
|
||||||
|
#define PA7 PIN_A7
|
||||||
|
#define PA9 16
|
||||||
|
#define PA10 17
|
||||||
|
|
||||||
|
|
||||||
|
// This must be a literal
|
||||||
|
#define NUM_DIGITAL_PINS 18
|
||||||
|
|
||||||
|
// define number of analog inputs
|
||||||
|
#define NUM_ANALOG_INPUTS 8
|
||||||
|
// #define NUM_ANALOG_FIRST 8
|
||||||
|
|
||||||
|
// SPI Definitions
|
||||||
|
#define PIN_SPI_SS PA4
|
||||||
|
#define PIN_SPI_MOSI PA7
|
||||||
|
#define PIN_SPI_MISO PA6
|
||||||
|
#define PIN_SPI_SCK PA5
|
||||||
|
|
||||||
|
// I2C Definitions
|
||||||
|
#define PIN_WIRE_SDA PB7
|
||||||
|
#define PIN_WIRE_SCL PB6
|
||||||
|
|
||||||
|
|
||||||
|
// UART Definitions
|
||||||
|
#define SERIAL_UART_INSTANCE 1 //ex: 1 for Serial1 (USART1)
|
||||||
|
|
||||||
|
//
|
||||||
|
#define PIN_SERIAL_RX PA10
|
||||||
|
#define PIN_SERIAL_TX PA9
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
} // extern "C"
|
||||||
|
#endif
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Arduino objects - C++ only
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
// These serial port names are intended to allow libraries and architecture-neutral
|
||||||
|
// sketches to automatically default to the correct port name for a particular type
|
||||||
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||||
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||||
|
// pins are NOT connected to anything by default.
|
||||||
|
#define SERIAL_PORT_MONITOR Serial
|
||||||
|
#define SERIAL_PORT_HARDWARE Serial1
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* _VARIANT_ARDUINO_STM32_ */
|
189
variants/MINIPILL_L051XX_LORA_CUSTOM/PeripheralPins.c
Normal file
189
variants/MINIPILL_L051XX_LORA_CUSTOM/PeripheralPins.c
Normal file
@ -0,0 +1,189 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2019, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* This software component is licensed by ST under BSD 3-Clause license,
|
||||||
|
* the "License"; You may not use this file except in compliance with the
|
||||||
|
* License. You may obtain a copy of the License at:
|
||||||
|
* opensource.org/licenses/BSD-3-Clause
|
||||||
|
*
|
||||||
|
*******************************************************************************
|
||||||
|
* Initially Automatically generated from STM32L051C(6-8)Tx.xml
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For MiniPill LoRa configuration
|
||||||
|
* 2020-12-27 Changed for I2C SDA to PB_7 and SCL to PB_6
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "Arduino.h"
|
||||||
|
#include "PeripheralPins.h"
|
||||||
|
|
||||||
|
/* =====
|
||||||
|
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||||
|
* If you change them, you will have to know what you do
|
||||||
|
* =====
|
||||||
|
*/
|
||||||
|
|
||||||
|
//*** ADC ***
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_ADC[] = {
|
||||||
|
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
|
||||||
|
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
|
||||||
|
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2
|
||||||
|
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3
|
||||||
|
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4
|
||||||
|
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5
|
||||||
|
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6
|
||||||
|
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7
|
||||||
|
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8
|
||||||
|
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No DAC ***
|
||||||
|
|
||||||
|
//*** I2C ***
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||||
|
//{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
|
||||||
|
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
//{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||||
|
//{PB_14, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||||
|
//{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF1_I2C1)},
|
||||||
|
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
//{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF6_I2C2)},
|
||||||
|
//{PB_13, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF5_I2C2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** PWM ***
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_PWM[] = {
|
||||||
|
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
|
||||||
|
//{PA_2, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 1, 0)}, // TIM21_CH1
|
||||||
|
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
|
||||||
|
//{PA_3, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_TIM21, 2, 0)}, // TIM21_CH2
|
||||||
|
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PA_6, TIM22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 1, 0)}, // TIM22_CH1
|
||||||
|
{PA_7, TIM22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM22, 2, 0)}, // TIM22_CH2
|
||||||
|
{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PB_4, TIM22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 1, 0)}, // TIM22_CH1
|
||||||
|
{PB_5, TIM22, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_TIM22, 2, 0)}, // TIM22_CH2
|
||||||
|
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 3, 0)}, // TIM2_CH3
|
||||||
|
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM2, 4, 0)}, // TIM2_CH4
|
||||||
|
{PB_13, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 1, 0)}, // TIM21_CH1
|
||||||
|
{PB_14, TIM21, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_TIM21, 2, 0)}, // TIM21_CH2
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SERIAL ***
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_TX[] = {
|
||||||
|
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
//{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||||
|
//{PA_14, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
|
||||||
|
{PB_10, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_RX[] = {
|
||||||
|
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
//{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||||
|
//{PA_15, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_USART1)},
|
||||||
|
{PB_11, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||||
|
//{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
//{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||||
|
//{PB_1, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
//{PB_12, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_LPUART1)},
|
||||||
|
//{PB_14, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||||
|
//{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART2)},
|
||||||
|
//{PA_6, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
//{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_USART1)},
|
||||||
|
//{PB_13, LPUART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF4_LPUART1)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SPI ***
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||||
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||||
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||||
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
//{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||||
|
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI1)},
|
||||||
|
//{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
//{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF0_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No CAN ***
|
||||||
|
|
||||||
|
//*** No ETHERNET ***
|
||||||
|
|
||||||
|
//*** No QUADSPI ***
|
||||||
|
|
||||||
|
//*** No USB ***
|
25
variants/MINIPILL_L051XX_LORA_CUSTOM/PinNamesVar.h
Normal file
25
variants/MINIPILL_L051XX_LORA_CUSTOM/PinNamesVar.h
Normal file
@ -0,0 +1,25 @@
|
|||||||
|
/* SYS_WKUP */
|
||||||
|
#ifdef PWR_WAKEUP_PIN1
|
||||||
|
SYS_WKUP1 = PA_0,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN2
|
||||||
|
SYS_WKUP2 = PC_13,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN3
|
||||||
|
SYS_WKUP3 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN4
|
||||||
|
SYS_WKUP4 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN5
|
||||||
|
SYS_WKUP5 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN6
|
||||||
|
SYS_WKUP6 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN7
|
||||||
|
SYS_WKUP7 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN8
|
||||||
|
SYS_WKUP8 = NC,
|
||||||
|
#endif
|
189
variants/MINIPILL_L051XX_LORA_CUSTOM/ldscript.ld
Normal file
189
variants/MINIPILL_L051XX_LORA_CUSTOM/ldscript.ld
Normal file
@ -0,0 +1,189 @@
|
|||||||
|
/*
|
||||||
|
******************************************************************************
|
||||||
|
**
|
||||||
|
|
||||||
|
** File : LinkerScript.ld
|
||||||
|
**
|
||||||
|
** Author : Auto-generated by Ac6 System Workbench
|
||||||
|
**
|
||||||
|
** Abstract : Linker script for STM32L051C8Tx series
|
||||||
|
** 64Kbytes FLASH and 8Kbytes RAM
|
||||||
|
**
|
||||||
|
** Set heap size, stack size and stack location according
|
||||||
|
** to application requirements.
|
||||||
|
**
|
||||||
|
** Set memory bank area and size if external memory is used.
|
||||||
|
**
|
||||||
|
** Target : STMicroelectronics STM32
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed “as is,” without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
** @attention
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20002000; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 8K
|
||||||
|
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = 64K
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM AT> FLASH
|
||||||
|
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(8);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
}
|
||||||
|
|
||||||
|
|
116
variants/MINIPILL_L051XX_LORA_CUSTOM/variant.cpp_HSI_I2C
Normal file
116
variants/MINIPILL_L051XX_LORA_CUSTOM/variant.cpp_HSI_I2C
Normal file
@ -0,0 +1,116 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
// Board Layout
|
||||||
|
// Same as
|
||||||
|
const PinName digitalPin[] = {
|
||||||
|
PB_4, // D0
|
||||||
|
PB_5,
|
||||||
|
PB_6,
|
||||||
|
PB_7,
|
||||||
|
PB_8,
|
||||||
|
PB_9,
|
||||||
|
PB_10,
|
||||||
|
PB_11,
|
||||||
|
PA_0, // D8/A0
|
||||||
|
PA_1,
|
||||||
|
PA_2,
|
||||||
|
PA_3,
|
||||||
|
PA_4,
|
||||||
|
PA_5,
|
||||||
|
PA_6,
|
||||||
|
PA_7,
|
||||||
|
PA_9,
|
||||||
|
PA_10
|
||||||
|
};
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* The system Clock is configured as follow :
|
||||||
|
* System Clock source = MSI
|
||||||
|
* SYSCLK(Hz) = 2,079,000
|
||||||
|
* HCLK(Hz) = 2,079,000
|
||||||
|
* AHB Prescaler = 1
|
||||||
|
* APB1 Prescaler = 1
|
||||||
|
* APB2 Prescaler = 1
|
||||||
|
* PLL_Source = NA
|
||||||
|
* PLL_Mul = NA
|
||||||
|
* Flash Latency(WS) = 0
|
||||||
|
* ADC Prescaler = 1
|
||||||
|
* USB Prescaler = NA
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
WEAK void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {0};
|
||||||
|
|
||||||
|
/** Configure the main internal regulator output voltage
|
||||||
|
*/
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
/** Initializes the RCC Oscillators according to the specified parameters
|
||||||
|
* in the RCC_OscInitTypeDef structure.
|
||||||
|
*/
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSI;
|
||||||
|
RCC_OscInitStruct.HSIState = RCC_HSI_ON;
|
||||||
|
RCC_OscInitStruct.HSICalibrationValue = RCC_HSICALIBRATION_DEFAULT;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Initializes the CPU, AHB and APB buses clocks
|
||||||
|
*/
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||||
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_HSI;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV8;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_I2C1;
|
||||||
|
PeriphClkInit.I2c1ClockSelection = RCC_I2C1CLKSOURCE_HSI;
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
@ -0,0 +1,130 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
|
||||||
|
// Board Layout
|
||||||
|
// Same as
|
||||||
|
const PinName digitalPin[] = {
|
||||||
|
PB_4, // D0
|
||||||
|
PB_5,
|
||||||
|
PB_6,
|
||||||
|
PB_7,
|
||||||
|
PB_8,
|
||||||
|
PB_9,
|
||||||
|
PB_10,
|
||||||
|
PB_11,
|
||||||
|
PA_0, // D8/A0
|
||||||
|
PA_1,
|
||||||
|
PA_2,
|
||||||
|
PA_3,
|
||||||
|
PA_4,
|
||||||
|
PA_5,
|
||||||
|
PA_6,
|
||||||
|
PA_7, // D15/A7
|
||||||
|
PA_9,
|
||||||
|
PA_10
|
||||||
|
};
|
||||||
|
|
||||||
|
// Analog (Ax) pin number array
|
||||||
|
const uint32_t analogInputPin[] = {
|
||||||
|
8, // A0, PA0
|
||||||
|
9, // A1, PA1
|
||||||
|
10, // A2, PA2
|
||||||
|
11, // A3, PA3
|
||||||
|
12, // A4, PA4
|
||||||
|
13, // A5, PA5
|
||||||
|
14, // A6, PA6
|
||||||
|
15 // A7, PA7
|
||||||
|
// 16, // A8, PB0
|
||||||
|
// 17 // A9, PB1
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* The system Clock is configured as follow :
|
||||||
|
* System Clock source = MSI
|
||||||
|
* SYSCLK(Hz) = 2,079,000
|
||||||
|
* HCLK(Hz) = 2,079,000
|
||||||
|
* AHB Prescaler = 1
|
||||||
|
* APB1 Prescaler = 1
|
||||||
|
* APB2 Prescaler = 1
|
||||||
|
* PLL_Source = NA
|
||||||
|
* PLL_Mul = NA
|
||||||
|
* Flash Latency(WS) = 0
|
||||||
|
* ADC Prescaler = 1
|
||||||
|
* USB Prescaler = NA
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
WEAK void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {};
|
||||||
|
RCC_PeriphCLKInitTypeDef PeriphClkInit = {};
|
||||||
|
|
||||||
|
/* Configure the main internal regulator output voltage */
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
|
||||||
|
/* Initializes the CPU, AHB and APB busses clocks */
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
|
||||||
|
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
|
||||||
|
RCC_OscInitStruct.MSICalibrationValue = 0;
|
||||||
|
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_5;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Initializes the CPU, AHB and APB busses clocks */
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||||
|
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
PeriphClkInit.PeriphClockSelection = RCC_PERIPHCLK_USART1 | RCC_PERIPHCLK_USART2;
|
||||||
|
PeriphClkInit.Usart1ClockSelection = RCC_USART1CLKSOURCE_PCLK2;
|
||||||
|
PeriphClkInit.Usart2ClockSelection = RCC_USART2CLKSOURCE_PCLK1;
|
||||||
|
if (HAL_RCCEx_PeriphCLKConfig(&PeriphClkInit) != HAL_OK) {
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
@ -0,0 +1,111 @@
|
|||||||
|
/*
|
||||||
|
Copyright (c) 2011 Arduino. All right reserved.
|
||||||
|
|
||||||
|
This library is free software; you can redistribute it and/or
|
||||||
|
modify it under the terms of the GNU Lesser General Public
|
||||||
|
License as published by the Free Software Foundation; either
|
||||||
|
version 2.1 of the License, or (at your option) any later version.
|
||||||
|
|
||||||
|
This library is distributed in the hope that it will be useful,
|
||||||
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||||
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||||
|
See the GNU Lesser General Public License for more details.
|
||||||
|
|
||||||
|
You should have received a copy of the GNU Lesser General Public
|
||||||
|
License along with this library; if not, write to the Free Software
|
||||||
|
Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* For MiniPill LoRa:
|
||||||
|
* 2020-12-27 added I2C Definitions
|
||||||
|
* 2020-02-21 changed PIN_SPI_SS from PA2 to PA4
|
||||||
|
*/
|
||||||
|
|
||||||
|
|
||||||
|
#ifndef _VARIANT_ARDUINO_STM32_
|
||||||
|
#define _VARIANT_ARDUINO_STM32_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif // __cplusplus
|
||||||
|
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Pins
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
// defined in order of D0-D10 A0-A3
|
||||||
|
|
||||||
|
#define PB4 0
|
||||||
|
#define PB5 1
|
||||||
|
#define PB6 2
|
||||||
|
#define PB7 3
|
||||||
|
#define PB8 4
|
||||||
|
#define PB9 5
|
||||||
|
#define PB10 6
|
||||||
|
#define PB11 7
|
||||||
|
#define PA0 PIN_A0
|
||||||
|
#define PA1 PIN_A1
|
||||||
|
#define PA2 PIN_A2
|
||||||
|
#define PA3 PIN_A3
|
||||||
|
#define PA4 PIN_A4
|
||||||
|
#define PA5 PIN_A5
|
||||||
|
#define PA6 PIN_A6
|
||||||
|
#define PA7 PIN_A7
|
||||||
|
#define PA9 16
|
||||||
|
#define PA10 17
|
||||||
|
|
||||||
|
|
||||||
|
// This must be a literal
|
||||||
|
#define NUM_DIGITAL_PINS 18
|
||||||
|
|
||||||
|
// define number of analog inputs
|
||||||
|
#define NUM_ANALOG_INPUTS 8
|
||||||
|
// #define NUM_ANALOG_FIRST 8
|
||||||
|
|
||||||
|
// SPI Definitions
|
||||||
|
#define PIN_SPI_SS PA4
|
||||||
|
#define PIN_SPI_MOSI PA7
|
||||||
|
#define PIN_SPI_MISO PA6
|
||||||
|
#define PIN_SPI_SCK PA5
|
||||||
|
|
||||||
|
// I2C Definitions
|
||||||
|
#define PIN_WIRE_SDA PB9
|
||||||
|
#define PIN_WIRE_SCL PB8
|
||||||
|
|
||||||
|
|
||||||
|
// UART Definitions
|
||||||
|
#define SERIAL_UART_INSTANCE 1 //ex: 1 for Serial1 (USART1)
|
||||||
|
|
||||||
|
//
|
||||||
|
#define PIN_SERIAL_RX PB7
|
||||||
|
#define PIN_SERIAL_TX PB6
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
} // extern "C"
|
||||||
|
#endif
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Arduino objects - C++ only
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
// These serial port names are intended to allow libraries and architecture-neutral
|
||||||
|
// sketches to automatically default to the correct port name for a particular type
|
||||||
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||||
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||||
|
// pins are NOT connected to anything by default.
|
||||||
|
#define SERIAL_PORT_MONITOR Serial
|
||||||
|
#define SERIAL_PORT_HARDWARE Serial1
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* _VARIANT_ARDUINO_STM32_ */
|
227
variants/MINIPILL_L151XX_LORA/PeripheralPins.c
Normal file
227
variants/MINIPILL_L151XX_LORA/PeripheralPins.c
Normal file
@ -0,0 +1,227 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2019, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*******************************************************************************
|
||||||
|
* Automatically generated from STM32L151C(6-8-B)Tx(A).xml
|
||||||
|
*/
|
||||||
|
#include "Arduino.h"
|
||||||
|
#include "PeripheralPins.h"
|
||||||
|
|
||||||
|
/* =====
|
||||||
|
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||||
|
* If you change them, you will have to know what you do
|
||||||
|
* =====
|
||||||
|
*/
|
||||||
|
|
||||||
|
//*** ADC ***
|
||||||
|
|
||||||
|
#ifdef HAL_ADC_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_ADC[] = {
|
||||||
|
// {PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC_IN0
|
||||||
|
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC_IN1
|
||||||
|
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC_IN2 - ADC_VBAT
|
||||||
|
// {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC_IN3 - RADIO_DIO_2
|
||||||
|
// {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC_IN4 - RADIO_RF_CTX_PA
|
||||||
|
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC_IN5 - RADIO_SCLK
|
||||||
|
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC_IN6 - RADIO_MISO
|
||||||
|
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC_IN7 - RADIO_MOSI
|
||||||
|
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC_IN8 - RADIO_NSS
|
||||||
|
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC_IN9 - RADIO_DIO_1
|
||||||
|
{PB_12, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 18, 0)}, // ADC_IN18
|
||||||
|
// {PB_13, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 19, 0)}, // ADC_IN19 - RADIO_RESET
|
||||||
|
// {PB_14, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 20, 0)}, // ADC_IN20 - LIS3DH_INT1_PIN
|
||||||
|
// {PB_15, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 21, 0)}, // ADC_IN21 - LIS3DH_INT2_PIN
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** DAC ***
|
||||||
|
|
||||||
|
#ifdef HAL_DAC_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_DAC[] = {
|
||||||
|
// {PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1 - RADIO_RF_CTX_PA
|
||||||
|
// {PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2 - RADIO_SCLK
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** I2C ***
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||||
|
// {PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // RADIO_RF_CBT_HF
|
||||||
|
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
// {PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // GPS_UART_RX
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_I2C_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||||
|
// {PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)}, // RADIO_RF_CRX_RX
|
||||||
|
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||||
|
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)}, // GPS_UART_TX
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** PWM ***
|
||||||
|
|
||||||
|
#ifdef HAL_TIM_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_PWM[] = {
|
||||||
|
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||||
|
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - ADC_VBAT
|
||||||
|
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - ADC_VBAT
|
||||||
|
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - RADIO_DIO_2
|
||||||
|
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - RADIO_DIO_2
|
||||||
|
// {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - RADIO_SCLK
|
||||||
|
// {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - RADIO_MISO
|
||||||
|
// {PA_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1 - RADIO_MISO
|
||||||
|
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2 - RADIO_MOSI
|
||||||
|
// {PA_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - RADIO_MOSI
|
||||||
|
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1 - GPS_POWER_ON_PIN
|
||||||
|
// {PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 - RADIO_NSS
|
||||||
|
// {PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 - RADIO_DIO_1
|
||||||
|
{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||||
|
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1 - LED2
|
||||||
|
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||||
|
// {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 - RADIO_RF_CRX_RX
|
||||||
|
// {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2 - RADIO_RF_CBT_HF
|
||||||
|
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||||
|
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||||
|
// {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||||
|
{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||||
|
// {PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 - GPS_UART_TX
|
||||||
|
// {PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4 - GPS_UART_RX
|
||||||
|
{PB_12, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||||
|
// {PB_13, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 - RADIO_RESET
|
||||||
|
// {PB_14, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 - LIS3DH_INT1_PIN
|
||||||
|
// {PB_15, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1 - LIS3DH_INT2_PIN
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SERIAL ***
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_TX[] = {
|
||||||
|
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // ADC_VBAT
|
||||||
|
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // UART_TX
|
||||||
|
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_RF_CRX_RX
|
||||||
|
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // GPS_UART_TX
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_RX[] = {
|
||||||
|
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, // RADIO_DIO_2
|
||||||
|
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // UART_RX
|
||||||
|
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_RF_CBT_HF
|
||||||
|
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // GPS_UART_RX
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||||
|
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // LED1
|
||||||
|
// {PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // LIS3DH_INT1_PIN
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_UART_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||||
|
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||||
|
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, // RADIO_DIO_0
|
||||||
|
// {PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // RADIO_RESET
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** SPI ***
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||||
|
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_MOSI
|
||||||
|
// {PA_12, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // LED1
|
||||||
|
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // LIS3DH_INT2_PIN
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||||
|
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_MISO
|
||||||
|
// {PA_11, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_DIO_0
|
||||||
|
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // LED2
|
||||||
|
// {PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // LIS3DH_INT1_PIN
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||||
|
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_SCLK
|
||||||
|
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||||
|
// {PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)}, // RADIO_RESET
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#ifdef HAL_SPI_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||||
|
// {PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // RADIO_RF_CTX_PA
|
||||||
|
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)}, // GPS_POWER_ON_PIN
|
||||||
|
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No CAN ***
|
||||||
|
|
||||||
|
//*** No ETHERNET ***
|
||||||
|
|
||||||
|
//*** No QUADSPI ***
|
||||||
|
|
||||||
|
//*** USB ***
|
||||||
|
|
||||||
|
#ifdef HAL_PCD_MODULE_ENABLED
|
||||||
|
WEAK const PinMap PinMap_USB[] = {
|
||||||
|
{PA_11, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DM
|
||||||
|
{PA_12, USB, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF10_USB)}, // USB_DP
|
||||||
|
{NC, NP, 0}
|
||||||
|
};
|
||||||
|
#endif
|
||||||
|
|
||||||
|
//*** No USB_OTG_FS ***
|
||||||
|
|
||||||
|
//*** No USB_OTG_HS ***
|
30
variants/MINIPILL_L151XX_LORA/PinNamesVar.h
Normal file
30
variants/MINIPILL_L151XX_LORA/PinNamesVar.h
Normal file
@ -0,0 +1,30 @@
|
|||||||
|
/* SYS_WKUP */
|
||||||
|
#ifdef PWR_WAKEUP_PIN1
|
||||||
|
SYS_WKUP1 = PA_0,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN2
|
||||||
|
SYS_WKUP2 = PC_13,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN3
|
||||||
|
SYS_WKUP3 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN4
|
||||||
|
SYS_WKUP4 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN5
|
||||||
|
SYS_WKUP5 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN6
|
||||||
|
SYS_WKUP6 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN7
|
||||||
|
SYS_WKUP7 = NC,
|
||||||
|
#endif
|
||||||
|
#ifdef PWR_WAKEUP_PIN8
|
||||||
|
SYS_WKUP8 = NC,
|
||||||
|
#endif
|
||||||
|
/* USB */
|
||||||
|
#ifdef USBCON
|
||||||
|
USB_DM = PA_11,
|
||||||
|
USB_DP = PA_12,
|
||||||
|
#endif
|
188
variants/MINIPILL_L151XX_LORA/ldscript.ld
Normal file
188
variants/MINIPILL_L151XX_LORA/ldscript.ld
Normal file
@ -0,0 +1,188 @@
|
|||||||
|
/*
|
||||||
|
*****************************************************************************
|
||||||
|
**
|
||||||
|
|
||||||
|
** File : LinkerScript.ld
|
||||||
|
**
|
||||||
|
** Abstract : Linker script for STM32L151CBTx(A) Device with
|
||||||
|
** 128KByte FLASH, 16/32KByte RAM
|
||||||
|
**
|
||||||
|
** Set heap size, stack size and stack location according
|
||||||
|
** to application requirements.
|
||||||
|
**
|
||||||
|
** Set memory bank area and size if external memory is used.
|
||||||
|
**
|
||||||
|
** Target : STMicroelectronics STM32
|
||||||
|
**
|
||||||
|
**
|
||||||
|
** Distribution: The file is distributed as is, without any warranty
|
||||||
|
** of any kind.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
** @attention
|
||||||
|
**
|
||||||
|
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||||
|
**
|
||||||
|
** Redistribution and use in source and binary forms, with or without modification,
|
||||||
|
** are permitted provided that the following conditions are met:
|
||||||
|
** 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer.
|
||||||
|
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
** this list of conditions and the following disclaimer in the documentation
|
||||||
|
** and/or other materials provided with the distribution.
|
||||||
|
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||||
|
** may be used to endorse or promote products derived from this software
|
||||||
|
** without specific prior written permission.
|
||||||
|
**
|
||||||
|
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
**
|
||||||
|
*****************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
/* Entry Point */
|
||||||
|
ENTRY(Reset_Handler)
|
||||||
|
|
||||||
|
/* Highest address of the user mode stack */
|
||||||
|
_estack = 0x20000000 + LD_MAX_DATA_SIZE; /* end of RAM */
|
||||||
|
/* Generate a link error if heap and stack don't fit into RAM */
|
||||||
|
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||||
|
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||||
|
|
||||||
|
/* Specify the memory areas */
|
||||||
|
MEMORY
|
||||||
|
{
|
||||||
|
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = LD_MAX_DATA_SIZE
|
||||||
|
FLASH (rx) : ORIGIN = 0x8000000, LENGTH = LD_MAX_SIZE
|
||||||
|
}
|
||||||
|
|
||||||
|
/* Define output sections */
|
||||||
|
SECTIONS
|
||||||
|
{
|
||||||
|
/* The startup code goes first into FLASH */
|
||||||
|
.isr_vector :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
KEEP(*(.isr_vector)) /* Startup code */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* The program code and other data goes into FLASH */
|
||||||
|
.text ALIGN(4):
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.text) /* .text sections (code) */
|
||||||
|
*(.text*) /* .text* sections (code) */
|
||||||
|
*(.glue_7) /* glue arm to thumb code */
|
||||||
|
*(.glue_7t) /* glue thumb to arm code */
|
||||||
|
*(.eh_frame)
|
||||||
|
|
||||||
|
KEEP (*(.init))
|
||||||
|
KEEP (*(.fini))
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_etext = .; /* define a global symbols at end of code */
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* Constant data goes into FLASH */
|
||||||
|
.rodata ALIGN(4):
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||||
|
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||||
|
. = ALIGN(4);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||||
|
.ARM : {
|
||||||
|
__exidx_start = .;
|
||||||
|
*(.ARM.exidx*)
|
||||||
|
__exidx_end = .;
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
.preinit_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||||
|
KEEP (*(.preinit_array*))
|
||||||
|
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.init_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__init_array_start = .);
|
||||||
|
KEEP (*(SORT(.init_array.*)))
|
||||||
|
KEEP (*(.init_array*))
|
||||||
|
PROVIDE_HIDDEN (__init_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
.fini_array :
|
||||||
|
{
|
||||||
|
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||||
|
KEEP (*(SORT(.fini_array.*)))
|
||||||
|
KEEP (*(.fini_array*))
|
||||||
|
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||||
|
} >FLASH
|
||||||
|
|
||||||
|
/* used by the startup to initialize data */
|
||||||
|
_sidata = LOADADDR(.data);
|
||||||
|
|
||||||
|
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||||
|
.data :
|
||||||
|
{
|
||||||
|
. = ALIGN(4);
|
||||||
|
_sdata = .; /* create a global symbol at data start */
|
||||||
|
*(.data) /* .data sections */
|
||||||
|
*(.data*) /* .data* sections */
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_edata = .; /* define a global symbol at data end */
|
||||||
|
} >RAM AT> FLASH
|
||||||
|
|
||||||
|
|
||||||
|
/* Uninitialized data section */
|
||||||
|
. = ALIGN(4);
|
||||||
|
.bss :
|
||||||
|
{
|
||||||
|
/* This is used by the startup in order to initialize the .bss secion */
|
||||||
|
_sbss = .; /* define a global symbol at bss start */
|
||||||
|
__bss_start__ = _sbss;
|
||||||
|
*(.bss)
|
||||||
|
*(.bss*)
|
||||||
|
*(COMMON)
|
||||||
|
|
||||||
|
. = ALIGN(4);
|
||||||
|
_ebss = .; /* define a global symbol at bss end */
|
||||||
|
__bss_end__ = _ebss;
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||||
|
._user_heap_stack :
|
||||||
|
{
|
||||||
|
. = ALIGN(8);
|
||||||
|
PROVIDE ( end = . );
|
||||||
|
PROVIDE ( _end = . );
|
||||||
|
. = . + _Min_Heap_Size;
|
||||||
|
. = . + _Min_Stack_Size;
|
||||||
|
. = ALIGN(8);
|
||||||
|
} >RAM
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
/* Remove information from the standard libraries */
|
||||||
|
/DISCARD/ :
|
||||||
|
{
|
||||||
|
libc.a ( * )
|
||||||
|
libm.a ( * )
|
||||||
|
libgcc.a ( * )
|
||||||
|
}
|
||||||
|
|
||||||
|
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||||
|
}
|
||||||
|
|
||||||
|
|
130
variants/MINIPILL_L151XX_LORA/variant_MINIPILL_L151C8_LORA.cpp
Normal file
130
variants/MINIPILL_L151XX_LORA/variant_MINIPILL_L151C8_LORA.cpp
Normal file
@ -0,0 +1,130 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2018, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
#include "pins_arduino.h"
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// Pin number
|
||||||
|
const PinName digitalPin[] = {
|
||||||
|
PB_4, // D0
|
||||||
|
PB_5,
|
||||||
|
PB_6,
|
||||||
|
PB_7,
|
||||||
|
PB_8,
|
||||||
|
PB_9,
|
||||||
|
PB_10,
|
||||||
|
PB_11,
|
||||||
|
PA_0, // D8/A0
|
||||||
|
PA_1,
|
||||||
|
PA_2,
|
||||||
|
PA_3,
|
||||||
|
PA_4,
|
||||||
|
PA_5,
|
||||||
|
PA_6,
|
||||||
|
PA_7, // D15/A7
|
||||||
|
PA_9,
|
||||||
|
PA_10 // D17
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
// Analog (Ax) pin number array
|
||||||
|
const uint32_t analogInputPin[] = {
|
||||||
|
8, // A0, PA0
|
||||||
|
9, // A1, PA1
|
||||||
|
10, // A2, PA2
|
||||||
|
11, // A3, PA3
|
||||||
|
12, // A4, PA4
|
||||||
|
13, // A5, PA5
|
||||||
|
14, // A6, PA6
|
||||||
|
15 // A7, PA7
|
||||||
|
};
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
|
||||||
|
// ----------------------------------------------------------------------------
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif
|
||||||
|
|
||||||
|
/**
|
||||||
|
* @brief System Clock Configuration
|
||||||
|
* @param None
|
||||||
|
* @retval None
|
||||||
|
*/
|
||||||
|
WEAK void SystemClock_Config(void)
|
||||||
|
{
|
||||||
|
RCC_OscInitTypeDef RCC_OscInitStruct = {0};
|
||||||
|
RCC_ClkInitTypeDef RCC_ClkInitStruct = {0};
|
||||||
|
|
||||||
|
/** Configure the main internal regulator output voltage
|
||||||
|
*/
|
||||||
|
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||||
|
/** Initializes the RCC Oscillators according to the specified parameters
|
||||||
|
* in the RCC_OscInitTypeDef structure.
|
||||||
|
*/
|
||||||
|
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_MSI;
|
||||||
|
RCC_OscInitStruct.MSIState = RCC_MSI_ON;
|
||||||
|
RCC_OscInitStruct.MSICalibrationValue = 0;
|
||||||
|
RCC_OscInitStruct.MSIClockRange = RCC_MSIRANGE_5;
|
||||||
|
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_NONE;
|
||||||
|
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
/** Initializes the CPU, AHB and APB buses clocks
|
||||||
|
*/
|
||||||
|
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK|RCC_CLOCKTYPE_SYSCLK
|
||||||
|
|RCC_CLOCKTYPE_PCLK1|RCC_CLOCKTYPE_PCLK2;
|
||||||
|
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_MSI;
|
||||||
|
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV1;
|
||||||
|
|
||||||
|
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_0) != HAL_OK)
|
||||||
|
{
|
||||||
|
Error_Handler();
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
}
|
||||||
|
#endif
|
125
variants/MINIPILL_L151XX_LORA/variant_MINIPILL_L151C8_LORA.h
Normal file
125
variants/MINIPILL_L151XX_LORA/variant_MINIPILL_L151C8_LORA.h
Normal file
@ -0,0 +1,125 @@
|
|||||||
|
/*
|
||||||
|
*******************************************************************************
|
||||||
|
* Copyright (c) 2018, STMicroelectronics
|
||||||
|
* All rights reserved.
|
||||||
|
*
|
||||||
|
* Redistribution and use in source and binary forms, with or without
|
||||||
|
* modification, are permitted provided that the following conditions are met:
|
||||||
|
*
|
||||||
|
* 1. Redistributions of source code must retain the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer.
|
||||||
|
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||||
|
* this list of conditions and the following disclaimer in the documentation
|
||||||
|
* and/or other materials provided with the distribution.
|
||||||
|
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||||
|
* may be used to endorse or promote products derived from this software
|
||||||
|
* without specific prior written permission.
|
||||||
|
*
|
||||||
|
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||||
|
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||||
|
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||||
|
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||||
|
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||||
|
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||||
|
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||||
|
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||||
|
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||||
|
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||||
|
*******************************************************************************
|
||||||
|
*/
|
||||||
|
|
||||||
|
#ifndef _VARIANT_ARDUINO_STM32_
|
||||||
|
#define _VARIANT_ARDUINO_STM32_
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
extern "C" {
|
||||||
|
#endif // __cplusplus
|
||||||
|
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Pins
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#define PB4 0
|
||||||
|
#define PB5 1
|
||||||
|
#define PB6 2
|
||||||
|
#define PB7 3
|
||||||
|
#define PB8 4
|
||||||
|
#define PB9 5
|
||||||
|
#define PB10 6
|
||||||
|
#define PB11 7
|
||||||
|
#define PA0 PIN_A0
|
||||||
|
#define PA1 PIN_A1
|
||||||
|
#define PA2 PIN_A2
|
||||||
|
#define PA3 PIN_A3
|
||||||
|
#define PA4 PIN_A4
|
||||||
|
#define PA5 PIN_A5
|
||||||
|
#define PA6 PIN_A6
|
||||||
|
#define PA7 PIN_A7
|
||||||
|
// above changed for using analogRead() function
|
||||||
|
// remember clockspeed must be high enough for reading analog input/ADC
|
||||||
|
//#define PA0 8
|
||||||
|
//#define PA1 9
|
||||||
|
//#define PA2 10
|
||||||
|
//#define PA3 11
|
||||||
|
//#define PA4 12
|
||||||
|
//#define PA5 13
|
||||||
|
//#define PA6 14
|
||||||
|
//#define PA7 15
|
||||||
|
#define PA9 16
|
||||||
|
#define PA10 17
|
||||||
|
|
||||||
|
|
||||||
|
// This must be a literal
|
||||||
|
#define NUM_DIGITAL_PINS 18
|
||||||
|
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
||||||
|
#define NUM_ANALOG_INPUTS 8
|
||||||
|
// #define NUM_ANALOG_FIRST 8
|
||||||
|
|
||||||
|
// SPI Definitions
|
||||||
|
#define PIN_SPI_SS PA4
|
||||||
|
#define PIN_SPI_MOSI PA7
|
||||||
|
#define PIN_SPI_MISO PA6
|
||||||
|
#define PIN_SPI_SCK PA5
|
||||||
|
|
||||||
|
// I2C Definitions
|
||||||
|
#define PIN_WIRE_SDA PB9
|
||||||
|
#define PIN_WIRE_SCL PB8
|
||||||
|
|
||||||
|
// UART Definitions
|
||||||
|
#define SERIAL_UART_INSTANCE 1
|
||||||
|
// Default pin used for 'Serial' instance (ex: ST-Link)
|
||||||
|
// Mandatory for Firmata
|
||||||
|
#define PIN_SERIAL_RX PA10
|
||||||
|
#define PIN_SERIAL_TX PA9
|
||||||
|
|
||||||
|
/* HAL configuration */
|
||||||
|
#define HSE_VALUE 12000000U
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
} // extern "C"
|
||||||
|
#endif
|
||||||
|
/*----------------------------------------------------------------------------
|
||||||
|
* Arduino objects - C++ only
|
||||||
|
*----------------------------------------------------------------------------*/
|
||||||
|
|
||||||
|
#ifdef __cplusplus
|
||||||
|
// These serial port names are intended to allow libraries and architecture-neutral
|
||||||
|
// sketches to automatically default to the correct port name for a particular type
|
||||||
|
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||||
|
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||||
|
//
|
||||||
|
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||||
|
// pins are NOT connected to anything by default.
|
||||||
|
#define SERIAL_PORT_MONITOR Serial
|
||||||
|
#define SERIAL_PORT_HARDWARE Serial1
|
||||||
|
#endif
|
||||||
|
|
||||||
|
#endif /* _VARIANT_ARDUINO_STM32_ */
|
Loading…
Reference in New Issue
Block a user